Safety Guide; Features; Specifications - Baxtran STA Manuel D'usager

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

User's Guide
For good performance and precise measurement, be careful with daily operation and maintenance.
Note the following instructions:
The dynamometer must be EXCLUSIVELY to measure to TRACTION. Mobile loads that can cause tensions
or torsions must be suspended by flexible or revolving elements.
Put the load without causing impact.
DO NOT STOP under the suspended load.
Do NOT overload the scale. This will damage the loadcell and void the warranty.
Do NOT leave load hung on the scale for long. This will decrease the scale's accuracy and shorten the
loadcell's life.
Inspect shackle and hook before using. Check the clips, pins and screws regularly.
Check the battery power frequently. When the scale runs out of power, charge the battery with its
dedicated charger or replace it with a full one.
Rotate the load rather than the scale itself if needed.
Do NOT use the scale under thunder or rain.
Hang scale on shelf in dry and well-ventilated room. Do NOT place scale on the ground directly.
Do NOT attempt to repair the scale yourself. Contact your local representative.
This scale is a combination of the sound and proven mechanical design, with today's most advanced
electronics to provide a superb feature set. It is versatile, reliable, accurate and easy to operate.
Superb Quality:
Strictly in accordance with OIML R76, Chinese GB/T11883-2002 national standards, and European CE
directives.
Great Safety:
Aluminum-casting case, high firm hook and ring, dedicated weighing loadcell for safety installation.
Strong Reliability:
Cutting-edge technology, quality integrated circuit for high performance and long time stability.
Broad Applicability:
Popular and applicable in storage, textile, metallurgy industry, and so forth.
Easy Operation:
Ultra-red remote controlling design. Easy to operate on the scale or in distance.
36
Chinese GB/T11883-2002 Class III
Accuracy Class
Equivalent to OIML R76
Tare Range
100% F.S.
Zero Range
4% F.S.
≤10 seconds
Reading Stable Time
Overload Warning
100% F.S. + 9e
Max. Safety Load
125% F.S.
Ultimate Load
400% F.S.
80 hours ~ 200 hours with 6V/10Ah battery
Battery Life
60 hours ~ 100 hours with 6V/5Ah battery
Scale Battery
6V/10Ah or 6V/5Ah rechargeable battery
-10ºC ~ + 40ºC
Operating Temp.
≤90% a 20ºC
Operating Humidity
1,5 inch (38,1 mm) ultra-luminance LED
Display
1,2 inch (30 mm) ultra-luminance LED
STA/STR/STC

1. SAFETY GUIDE

2. FEATURES

3. SPECIFICATIONS

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

StrStc

Table des Matières