Product Description; Panel Description; Safety Recommendations - Baxtran STE Série Manuel D'utilisation

1. PRODUCT DESCRIPTION

STE is the new weighing device that, combined with the weight, load cell and power, can be connected directly to the lifting hook to obtain the
weight of the assembly and not assembled at the same time. The display has led with brightness, the number of displays can be clearly seen
from 25 meters. Portable structure and easy operation describe the STE scale, with high quality and competitive prices, this model has been
widely used in the textile, pharmaceutical, warehouses, etc. It is an ideal weighing device for the management of a modern company

2. PANEL DESCRIPTION

FUNCTION OF THE STE KEYS
Switch the STE on /off and Zero initialization.
Tare / Remove the tare
The following digits appear underneath the screen:
Stability indicator.
Tare indicator.
Current Weighing Mode.
•
Viewer with intense Led light of 8 sections. Great visibility of the viewer in different conditions.
•
The indicator light on the far right lights
•
The indicator light on the left end lights
•
The two intermediate indicator lights are unit lights.
•
Power saving mode: If the scale is connected but there is no weight on the scale for more than one minute, the screen will automatically
enter "energy saving mode" with bright spots circulating on the screen from right to left.

3. SAFETY RECOMMENDATIONS

•
Before using the crane scale, please, read this manual carefully and follow the instructions:
•
DON'T overload the crane scale, this could seriously damage the loadcell (repair not covered by the warranty).
•
DON'T leave any weight on the hook for a long time, this reduces the accuracy of the equipment and short the life of the load cell.
•
Before using the scale, check rings, hooks and other parts, cotter pin, if the screw is loose and deformation loose every 3 months.
•
Charge the battery when the display shows the low power indicator.
•
DON'T use the crane scale in rain or storms.
•
After used, hook should vertical suspended or the loadcell could be damaged.
•
DON'T try to repair the crane scale. Please contact with your Distributor.
up when the weight is stable.
up when we perform a tare.
USER'S MANUAL STE EN
3