Gima 34291 Instructions De Fonctionnement Et Entretien page 13

13
• Time presetting
Set up current time
- Press SELECT button to see the time light
- Press UP or DOWN
- Press Enter button to confirm as you want to presetting the date and time.
- Presetting the year in the first, press UP
- After presetting the year, press the Select button and upper will display "non" to select the month
- Press the UP or DOWN
- After presetting the month, press the Select button and upper will display "day" to select the day.
- Press the UP or DOWN
- After presetting the day, press the Select button to presetting the Hour, Minute and Second.
- Press the Enter to confirm all of time setting.
CAUTION: AFTER PRESETTING OF SpO2, PULSE RATE AND TIME, YOU MAY START TO DO THE
FOLLOWING FUNCTIONS.
• Memory recall function
Memory recall function is ONLY to be used when the appliance has been continuous detecting
for 2~3 minutes.
- Press SELECT button until the upper figure display SHO with lower flashing NO
- Press UP button to choose between flashing YES or NO figure
- Then Press Enter button to confirm.
- It will show the data of memory from record #1 with SpO2 in upper figure and Pulse Rate in lower figure
- Press the DOWN button to increase the record number.
- Press the Enter button to stop the memory recall function and go back to stand by for measuring
• Time resetting
Please use the setting when the time is incorrect.
- press SELECT button UNTIL the upper figure display SHO with lower flashing NO
- by press UP button to choose between flashing YES or NO figure
- then press DOWN
- keep pressing UP
- press SELECT button to see the lower flashing number
- keep pressing UP
- press DOWN button as ENTER button to confirm the setting
- then press SELECT button to go back to operation status
Switching off
After the measurement has been taken, turn the equipment off by means of ON/OFF pushbutton. A beep
is given out and then the equipment stops.
MAINTENANCE
The product has been conceived to last forever; it is resistant to most part of chemicals except for methyl
ethyl ketones (M.E.K.), diluents and nail polish removers.
To clean the instrument, make use of a cloth dampened with disinfectant.
button to select lower display "yes" flashing.
or DOWN
button to select the month currently.
button to select the day currently.
button as ENTER button to choose NO for time setting
button to set up current HOURS
button to set up current MINUTES
ENGLISH
on, and upper display "tin" and low display "no" flashing.
button to select the year currently.