Alarms Description - Blakeslee RC-62-3 DR24 Notice D'installation, D'emploi Et D'entretien

USA

12.2.1 Alarms description

Alphanumeric abbreviation
B2
B3
B5
B10
E1
E2
E3
E5
E7
M1
M2
M3
M7
U10
W1
Z8
Z17
ALARM B2 BOILER 1 PROBE FAILURE
Rated temperature cannot be reached.
It's recommended to suspend the washing.
Please contact the Technical Service.
ALARM B3 BOILER 1 HEATING FAILURE
Please turn OFF the appliance, by pressing the
Should the alarm persists, please contact the Technical Service.
ALARM B5 BOILER 1 OVERTEMPERATURE
It is recommended to turn
ALARM B10 RINSE LOW TEMPERATURE
Please make sure that rinse arms and nozzles are in the right position.
Should the alarm persists, please contact the Technical Service.
ALARM E1 WASH TANKS FILLING FAILURE
Please check that water inlet connection is working.
Please turn OFF the appliance, by pressing the
Should the alarm persists, please contact the Technical Service.
ALARM E2 WASH1 PROBE FAILURE
Washing results may be aff ected.
Please contact the Technical Service.
page 54
Alarm description
BOILER 1 PROBE FAILURE
BOILER 1 HEATING FAILURE
BOILER 1 OVERTEMPERATURE
RINSE LOW TEMPERATURE
WASH TANKS FILLING FAILURE
WASH1 PROBE FAILURE
WASH1 HEATING FAILURE
WASH1 OVERTEMPERATURE
WASH1 PUMP THERMAL PROTECTION
PREWASH FILLING FAILURE
PREWASH PROBE FAILURE
PREWASH COOLING FAILURE
PREWASH PUMP THERMAL PROT.
OPTIONAL MOTORS THERMAL PROT.
THERMAL PROTECTION
GENERAL ALARM
RINSE WATER SUPPLY FAILURE
ON/OFF B
OFF the appliance and contact the Technical Service.
ON/OFF B
button, and turn it ON again, after a few seconds.
button, and turn it ON again, after a few seconds.