Environmental Aspects; Packing; Disposal; Ecological Aspects - Blakeslee RC-62-3 DR24 Notice D'installation, D'emploi Et D'entretien

USA

10. ENVIRONMENTAL ASPECTS

10.1 Packing

The packing consists of the following:
•
•
•
Please dispose of the materials listed above, according to the current regulations.

10.2 Disposal

The machine must be disposed of according to current regulations: contact the Municipalized Firm responsible for collection
of urban solid waste.
Before disposing of the appliance, disconnect all water and electrical connections.
Cut the electrical cable in such a way as to prevent further use.
As all metal parts are stainless steel, they are therefore recyclable.
Recyclable plastic parts are identifi ed by the plastic symbol.

11. ECOLOGICAL ASPECTS

11.1 Recommendations for optimal use of energy, water and additives

Use the machine fully loaded when possible: This shall prevent detergent, rinse aid, water and energy waste.
Detergent and rinse-aid: Use detergent and rinse-aid chemicals with high biodegradability, to respect the environment
best. Verify the proper dosage in relation to water hardness at least once a year. Excess of product pollutes rivers
and seas while an insuffi cient dosing will cause unsatisfactory dish washing and/or hygiene.
Tank and boiler temperatures: The tank and boiler temperatures are set by the manufacturer in order to obtain the best
washing results with detergents on the market. These may be re-set by the installer according to your detergent.
Cleaning off : Carefully remove solids off the kitchenware using water at room temperature so as to make removal of animal
fats easier. To remove encrusted matter, soaking in hot water is recommended.
Notes: Wash the objects as soon as possible in order to prevent the deposits from drying and jeopardizing the eff ectiveness
of the washing. To get an effi cient wash, it is advisable to regularly clean and maintain the machine (see chap. 9).
Disregarding the points listed above and any information contained in this manual can cause energy, water and
detergent waste with a subsequent increase in running costs and/or performance reduction.
page 52
a wooden crate;
extensible belt in nylon (LDPE);
polystyrene foam (PS).