Programming; Technical Menu - Blakeslee RC-62-3 DR24 Notice D'installation, D'emploi Et D'entretien

USA
LIGHTS
1: Flashing green: machine ON and in operation.
Still green: machine ON in energy saving mode (see paragraph
2: Green: tanks fi lled.
3: Yellow: baskets limit switch activated.
4: Yellow: tank heating activated.
5: Still yellow: boiler heating activated.
Flashing yellow: intermittent boiler heating activated.
6: Green: lower speed selection.
7: Green: higher speed selection.
Both 6 and 7 lights are OFF when the machine is equipped with the optional INVERTER and an intermediate speed is
selected.
8: Green: INFO Menu
9 and 10: unused
11: Green: machine ON.
Still red: machine in stand-by mode
Flashing red: alarm

4. PROGRAMMING

Some parameters can be adjusted according to the user requirements.
It is necessary to enter in the
• Turn on the wall-mounted main switch
• Machine ON: press at the same time for 5 seconds the
• Use keys D ▼ (decrease) and
/ STOP A.
Use keys D ▼ (decrease) and
pressing key START / STOP
Press key ON/OFF B to exit without saving the settings.

4.1 Technical menu

M15-PR01 LANGUAGE
Use keys D ▼ (decrease) and
SPANISH, ...).
Press key START / STOP A
Press key ON/OFF B to exit without saving the settings.
M15-PR02 HOURS
Use keys D ▼ (decrease) and
Press key START / STOP A
Press key ON/OFF B to exit without saving the settings.
M15-PR03 MINUTES
Use keys D ▼ (decrease) and
Press key START / STOP A
Press key ON/OFF B to exit without saving the settings.
M15-PR04 DAY
Use keys D ▼ (decrease) and
Press key START / STOP A
Press key ON/OFF B to exit without saving the settings.
page 44
TECHNICAL menu with a security key to change the parameters.
H.
C ▲ (increase) to select the security key 15. Confi rm the selection by pressing key
C ▲ (increase) to scroll the menu items. Confi rm the selection of the chosen parameter by
A.
C ▲ (increase) to select the desired language
to confi rm the selection.
C ▲ (increase) to select the numerical value desired.
to confi rm the selection.
C ▲ (increase) to select the numerical value desired.
to confi rm the selection.
C ▲ (increase) to select the numerical value desired.
to confi rm the selection.
2.1 Autotimer)
START / STOP A and ON/OFF
(ITALIAN, ENGLISH, FRENCH, GERMAN,
B.
START