Special Programming Functions; Rinse Function - Schaerer Opal Mode D'emploi

User instruction

9.0 Special programming functions

9.1 Pre-brewing function
Your coffee maker leaves our factory with
the pre-brewing function activated to ensure
you get the absolute best aroma from your
ground coffee. However, you have the
option of disabling this function for any
selection button.
a) Switch the coffee maker to Standby
mode. The signal lamp 1b will light up
red.
b) Press and hold down the relevant
selection button (3, 7, 8, 9, 10) and then
press the mode selector switch to
return the machine to Readymode.
Repeat this procedure to reactivate the
pre-brewing function.

9.2 Rinse function

Whenever your coffee maker is switched on
from cold, it runs a rinse cycle to flush the
system through.
Page 62
9.3 Programming the standby timer
If your coffee maker is not used for one to
five hours, it will automatically switch to
Standby mode. The signal lamp 1b lights up
to indicate this status. You can change this
time setting to suit your preferences or
deactivate automatic Standby mode alto-
gether.
a) Switch the coffee maker to Standby
mode. The signal lamp 1b will light up
red.
b) Press and hold down the Program-
ming button together with the
ground coffee button
multaneously press the
tor switch to return the machine to
Ready mode.
c) The Programming display
shows the current time setting on a
scale from 1 to 6. Press the
to adjust the setting as follows:
1=1h / 2=2h / 3=3h / 4=4h /5=5 h 6=
automatic Standby mode deactivated
SCHAERER OPAL
and then si-
mode selec-
window
button
BAOP - 02 - V04