Servicing And Maintenance Work; Service Request ( Lamplights Up); Useful Tips About Coffee - Schaerer Opal Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

User instruction
6.
Swivelling steam and hot water nozzle is blocked
- The outlet is blocked. Please clean with a thin needle.
7.
You cannot remove or replace the brewing unit
- The brewing unit is not in home position. Close the service access
hatch and switch the coffee maker on.
- Use the special multifunctional tool to reset the brewing unit as you
replace it. You have probably moved one of the unit's elements.
8.
The appliance does not respond when you press any button-
although it is switched on
- The appliance has been switched on from cold and has not yet
reached its operating temperature.
- The automatic rinse programme is currently running, the cleaning in-
dicator (2a) is lit up.
- A signal lamp or icon is lit up. See the explanations section and
remedy as necessary.
If checking these points fails to solve the problem, please contact an author-
ised service specialist.

15.0 Servicing and maintenance work

Regular cleaning and descaling as per our recommendations is essential for
the correct performance of your appliance. Nevertheless, you should be
aware that even the best cared-for espresso maker will suffer natural wear
and tear if used intensively over a long period.
Page 70
16.0 Service Request (
Lamplights up
Lamplights up
service request:
The machine service has to be carried out. Contact a customer ser-
vice authorised by the manufacturer.
- The service request can only be reset by a service technician.
- Coffee machine is not blocked, beverages can still be served.
Attention:
The manufacturer accepts no liability, if the service has not been car-
ried out within a month.

17.0 Useful tips about coffee

A good cup of coffee does not depend on the coffee maker alone. The
local water, the coffee variety, how the beans are ground, the temperature -
all are important factors.
The following tips will help you get good results every time:
- Always use fresh, dark-roast coffee.
- Fresh coffee is always best stored in cool conditions. It is also suitable for
deep-freezing and can be used straight from the freezer.
- If your coffee comes out of the appliance too quickly or too slowly, this is
generally due to selecting an incorrect grinding fineness.
Coffee comes out too quickly: set the grinding fineness to a lower number,
e. g. pos. 2.
Coffee comes out too slowly: set the grinding fineness to a higher number,
e. g. pos. 5.
We recommend the factory default setting, which is 3 or 4.
- Warning: Remember you may only adjust grinding settings when the
grinder is running.
- Coffee tastes best from preheated cups. Follow our recommendations
from section 11.0.
SCHAERER OPAL
)
BAOP - 02 - V04

Publicité

Table des Matières
loading

Table des Matières