marklin V 200 Serie Mode D'emploi page 15

2
Operation
2.2 Setting the Mode
of Operation
1. Removing the body (=> page 41).
2. Setting the coding switches.
Switch 10 (0) at off:
Operation with AC power
Switch 10 (0) at on:
Operation with DC power
The Digital / Delta mode of operation
is always recognized automatically.
16
2.3 Setting the Digital Address
1. Removing the body (=> page 41).
2. Set the desired address with swit-
ches 1 to 8.
Example: 20 is the desired address.
Switches 3 and 7 at on.
Switches 1, 2, 4, 5, 6 and 8 at off.
Important:
Switch 9 must always be set at off.
2.4 Setting the Running
Characteristics
1. Removing the body (=> page 41).
2. The respective running characteri-
stics can be changed by changing
the setting on the potentiometers.
These potentiometers have a stop
at the end positions. When you
encounter resistance when turning
the "pots", do not try to turn them
further with force.
P1: Acceleration / braking delay
(together)
Left stop: minimum delay
Right stop: maximum delay
P2: Maximum speed
Left stop:
lowest maximum speed
Right stop:
highest maximum speed
P1
P2