Free-Max And Associated Max-Motor Technical Characteristics; Ec Declaration Of Conformity - Nice Free-Max Instructions Et Avertissements Pour L'installation Et L'utilisation

FREE-MAX AND ASSOCIATED MAX-MOTOR
TECHNICAL CHARACTERISTICS
◆ Power supply voltage and frequency; Current and Wattage; Torque and speed:
See technical specifications on the label of each model
◆ Diameter of the motor casing:
45 mm
◆ Accuracy (resolution) of the electronic limit switch:
Over 2.67°
◆ Accuracy of the limit switch stop positions:
±5 % (Class 2), in accordance with the EN 14202 Standard
◆ Mechanical resistance:
in accordance with the EN 14202 Standard
◆ Continuous operating time:
Maximum 4 minutes
◆ Protection rating:
IP 44
◆ Operating temperature:
from -20 to +55 °C
◆ Connection cable length:
3 m
◆ Frequency of the built-in Radio Receiver:
433.92 MHz
◆ Code type of the built-in Radio Receiver:
52 Bit rolling code FLOR and FLOR+INFO
◆ Number of Transmitters that can be memorised:
12 (including a max. of 3 VOLO-S-Radio Climatic sensors)
◆ Range of the ERGO, PLANO and NICEWAY Transmitters:
150 m in free field; 20 m inside buildings (*)
Note:
– (*) The transmitter range is strongly influenced by other devices operating at the same
frequency with continuous transmission, such as alarms and radio headphones which
interfere with the control unit receiver.
– All technical characteristics refer to an ambient temperature of 20°C (± 5°C).
– Nice S.p.a. reserves the right to apply modifications to the product at any time when
deemed necessary, while maintaining the same functionalities and intended use.

EC DECLARATION OF CONFORMITY

EC declaration of Conformity in accordance with Directive 1999/5/EC
Note: The content of this declaration of conformity corresponds to that of the official
document deposited at the registered offices of Nice S.p.a., and in particular to the
latest revision available prior to printing this manual. The text herein has been
readapted for editorial purposes.
Number: 246/FREE MAX Revision: 0
The undersigned, Lauro Buoro, in the role of Managing Director, declares under his
sole responsibility that the following product:
Manufacturer's name: NICE s.p.a.
Address: Via Pezza Alta 13, Z.I. Rustignè, 31046 Oderzo (TV) Italy.
Type: Tubular gear motor for roller shutters, awnings and sun
screens with built-in control unit and radio receiver.
Models: FREE MAX, including MAX MOTOR
Accessories: ERGO, PLANO, NICEWAY, FLO-R, VERY VR, series
remote controls, VOLO-S-Radio anemometer
Complies with the essential requirements of the following European Directives:
• 1999/5/EC; DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND
COUNCIL of 9 th March 1999 concerning radio equipment and telecommunica-
tions terminal equipment and mutual recognition of their conformity.
According to the following harmonised standards: EN 300220-3 V1.1.1:2000, EN
60950-1:2001.
Complies with the essential requirements of the following Directives, as amended by
directive 93/68/EEC of the European Council of 22 nd July 1993
• 73/23/EEC; DIRECTIVE 73/23/EEC OF THE EUROPEAN COUNCIL of 19 th Febru-
ary 1973 on approximation of laws in the Member States regarding electrical
equipment designed to be used within specific voltage limits.
According to the following harmonised standards: EN 60335-1:1994; EN 60335-2-
97:2000, EN 50366:2003.
• 89/336/EEC; DIRECTIVE 89/336/EEC OF THE EUROPEAN COUNCIL of 3 rd May
1989, on approximation of laws in the Member States regarding electromagnetic
compatibility.
According to the following standards: EN 301 489-1:2004 ; EN 301 489-3:2002
Oderzo, 16 th May 2006
Lauro Buoro
(Managing Director)
English – 25