❑ During the DOWN manoeuvre, the motor only moves if the key is
pressed for the whole manoeuvre, this being the "hold-to-run"
mode, even though "0" and "1" limit switch positions have been
programmed.
– For Awnings where limit switches have been programmed following the
Semiautomatic procedure: after self-diagnosis of memorised parameters,
Free-Max detects that the actual position of the motor does not correspond
to the memorised limit switch values. Therefore, give the awning an UP com-
mand and wait for it to automatically stop on position "0". This procedure
resets the initial correspondence between the actual position of the motor
and the position memorised during installation.
❑ After the memorisation of a "second" transmitter, the motor per-
forms 1 short motion instead of the foreseen 3 long motions.
– In this case it may be that the memory block has been activated. See para-
graph 16 in order to unblock the Free-Max memory.
24 – English
DISPOSAL OF THE PRODUCT
As in installation, also at the end of product lifetime, the disassembly and
scrapping operations must be performed by qualified personnel.
This product is made up of different types of material, some of which can be
recycled while others must be disposed of. Seek information on the recycling
and disposal systems envisaged by the local regulations in your area for this
product category.
Caution! – some parts of the product may contain pollutant or hazardous sub-
stances which, if disposed of into the environment, may cause serious damage
to the environment or physical health.
As indicated by the symbol on the left, disposal of this product in
domestic waste is strictly prohibited. Separate the waste into
categories for disposal, according to the methods envisaged by
current legislation in your area, or return the product to the retail-
er when purchasing a new version.
Caution! – Local legislation may envisage serious fines in the event of abusive
disposal of this product.