LGB F7 Santa-Fe Serie Mode D'emploi page 11

Register Assignment
CV 60 Back-EMF: Max. adjustment factor
CV 61 Back-EMF: Adjustment frequency
CV 62 Back-EMF: Maximum adjustment
SERVICE
Lubrication
The axle bearings should be lubricated occasionally with a
small amount of LGB Maintenance Oil (50019).
Replacing the light bulbs
Front lights: Carefully pry the lens away from the lantern.
Using tweezers, remove and replace the bulb. Reassemble.
Cab light: Using tweezers, remove and replace the bulb.
Replacing the traction tire
- Remove the side frames from the truck by removing two
screws.
- Use a small, straight-blade screwdriver to replace the
traction tire:
- Pry the old traction tire out of the wheel groove.
- Gently insert the new traction tire into the wheel groove.
- Make sure that the traction tire is seated properly in the
wheel groove.
- Reassemble.
Range Default
1 – 255 10
0 – 255 5
0 – 255 255
11