General operation
Switch on/off
General operation
Press
button.
Additional options for switching on/off: via ignition. In order
to switch on via the ignition, the unit must have been switched
off previously via the ignition. After switching off the igni-
tion, the unit can be prevented from switching off by pressing
the
button within 3 seconds.
Note:
With the ignition switched off, the unit can also be
switched on via the
es off automatically after 1 hour.
Adjusting the volume
Turn the left rotary control
decreased.
Activating the tone menu
Press
button. The tone menu is activated. The follow-
ing functions can be requested:
(Fader),
(Balance),
woofer) and
(Loudness).
78
button. The unit switch-
. The volume is increased or
(Bass),
(Treble),
(Linear setting),
(Sub-
Settings for the bass and treble are stored separately for wave-
bands MW/LW/SW and FM, for traffic announcements, nav-
igation messages, telephone operation, CD and CDC/AUX
operation.
Setting the bass
Press the
button and then the multifunction button
.
Set the desired bass level using the right rotary control
Setting the treble
Press the
button and then the multifunction button
.
Set the desired treble level using the right rotary control
.
.