Dynamic Autostore (Fm Das); Fm Das Transmitter Search; Transmitter Search Mw, Lw, Sw - JVC KD-NX1R Manuel D'instructions

Dynamic autostore (FM DAS)

In radio menu mode, press the
peatedly until
played.
In mode, the receivable transmitters are displayed
according to the setting via the multifunction buttons.
Set the desired transmitter by pressing the button directly be-
low the abbreviated station designation. If the selected trans-
mitter broadcasts several programmes/regional programmes,
a submenu is automatically displayed to select the desired
programme.
multifunction button re-
or is dis-
If a programme has previously been selected that belongs to
the particular transmitter chain, the last stored programme en-
try will be automatically selected.
The multifunction button
be pressed for displaying and selecting additional transmit-
ters.
To indicate those transmitters not easily identified due to the
display of advertisements or news, the abbreviation
( = Local) is used. This prevents constant switching in
the lower display line. When a transmitter is selected, it is in-
dicated by a star (e.g. ).
When using the unit for the first time, or following interrup-
tion of the power supply, allow for a brief waiting period so
that the receiver can evaluate the transmitter signals. The dis-
play will appear incrementally as the evaluation progresses.

FM DAS transmitter search

Turn the right rotary control
plays the receivable and identified transmitters in descending/
ascending order.

Transmitter search MW, LW, SW

In the desired waveband (
control to the left/right. The radio searches for reception
frequencies in descending/ascending order of frequency.
Radio operation
indicates that the button can
to the left/right. The radio dis-
, , ), turn the right rotary
113
...