Interrupting Tp Announcements; Tp Announcement Volume; Switching Tmc On/Off - JVC KD-NX1R Manuel D'instructions

Interrupting TP announcements

During a TP announcement, briefly press the
The announcement currently being broadcast will be
interrupted and the system will automatically return to the
previously selected mode.

TP announcement volume

Activate the TP menu. Press the
Using the right rotary control
( - ) can be selected. This means that the volume can be
raised to a fixed value according to the setting.
• Setting - no volume increase
• Setting - slight volume increase
• Setting - medium volume increase
• Setting - large volume increase
button.
multifunction button.
, four different settings

Switching TMC on/off

Note: You can find further information on TMC under
"Dynamic navigation with TMC" on page 97.
Activate the TP menu.
Switching on:
Press the multifunction button repeatedly until
is displayed.
If TMC is switched on, a traffic programme transmitter
cannot be selected freely. A TMC station is selected by the
unit, provided one can be received. This transmitter then
corresponds to the traffic programme transmitter.
Switching off:
Press the multifunction button repeatedly until
is displayed.
If TMC is switched off, a traffic programme transmitter can
be selected freely.
Note: Dynamic navigation functions (dynamic route,
traffic information) cannot be selected or called
up.
Radio operation
121