Regionalisation
The RDS diversity function is independent of region. If the
RDS diversity function should switch among various regional
programmes with diverse broadcast contents, the special re-
gional sub-programme must be selected directly.
A transmitter must first be selected in order to see if it broad-
casts more than one regional programme.
Transmitters with additional regional transmitters are identi-
fied by a star (e.g.
).
Upon selection of one of these transmitters (e.g.
ceivable regional sub-programmes for this transmitter will be
displayed.
Then select desired regional sub-programme (e.g.
If, despite RDS diversity function, the reception quality of a
regional sub-programme is inferior, bear in mind that regional
sub-programmes are transmitted for the most part over only a
few frequencies. If the unit remains tuned to frequencies with
better reception quality, there will be less drift.
Switching regionalisation on/off
Select radio menu mode.
Using the multifunction button
) all re-
tion on (
) or off (
Switching frequency display on/off
).
Select radio menu mode.
Using the multifunction button
(frequency display switched on) or
quency display switched off).
Radio operation
switch the regionalisa-
).
select either
(fre-
117