Other Main Functions; Changing General Settings (Psm); Setting The Clock - JVC KW-XC770 Manuel D'instructions

OTHER MAIN FUNCTIONS

Changing general settings (PSM)

You can change the following settings for this unit by using the PSM (Preferred Setting Mode)
control.
• PSM CLOCK (H/M): Adjusts the built-in clock (see below).
• PSM BEEP: Turns on or off the key-touch tone (see page 25).
• PSM DIMMER: Selects the dimmer mode (see page 25).
• PSM AREA: Selects the area you use this unit — when using this unit in an area other than
North or South America (see page 11).
• PSM LINE IN: Selects the external component to use (see page 26).
• PSM DEMO: Turn on or off the display demonstration (see page 26).
Control dial

Setting the clock

After installation, set the built-in clock correctly.
1 Press SEL for more than 2 seconds.
One of the PSM items appears on the display.
2 If "PSM CLOCK H" does not appear, press ¢
3 Turn the control dial to adjust the hour.
4 Press ¢
5 Turn the control dial to adjust the minute.
6 Press SEL again to finish the setting.
24
¢
4
SEL
or 4
until "PSM CLOCK M" appears on the display.
or 4
repeatedly until it appears.
\
The hour digit starts flashing.
\
The minute digit starts flashing.