Playing Cds; Track Skip - Forwards/Backwards; Intro Scan - JVC KD-NX1R Manuel D'instructions

Playing CDs

Press button. If the unit was last set to CD changer op-
eration or there is no CD (or navigation CD) in the CD drive,
the CD changer menu is now active.
If CD operation was last selected, use the multifunction but-
ton to switch to CD changer operation.
The last CD to be played is played from the position at which
it was left before switching off.
Stored CDs can be selected by turning the right rotary
control .
time. The magazine compartment number of the CD and the
number of the current track on the selected CD are then dis-
played.
K K
If no CD is present in the selected magazine compartment
(e.g. compartment 2),
After playing the last track of a CD, the next CD is automati-
cally selected and played.
is displayed during the selection
is displayed briefly.
CD changer operation

Track skip - forwards/backwards

Press the multifunction button
(backwards).
By pressing the multifunction button repeatedly, several
tracks can be skipped over in forward or reverse directions.
The unit switches to the first track when the last track has
been reached. Analogously, it switches from the first track to
the last track.
If the track has been playing for longer than 10 seconds when
the track skip function is triggered, the device returns to the
beginning of the track.

Intro scan

Press the right rotary control
All following CD tracks are played for 15 seconds each. Press
the right rotary control again to terminate intro scan.
(forwards) or
K
K
, appears on the display.
127