. !PL
Using the multifunction button
changed from the 24 hour to the 12 hour display.
. !PL
Using the multifunction buttons
changed every half an hour.
By pressing the right rotary control
button
the time set is accepted.
PL
The program returns to the system settings menu.
Saving the position
Select
in the system settings menu and con-
firm.
The current co-ordinates (degrees of longitude and latitude)
for the position are displayed.
the time can be
Confirm again by pressing the right rotary control
Enter the name of the position.
Press the right rotary control
or
the time is
.
confirm the name entered. To confirm, the small tick
also be marked and the right rotary control
or the multifunction
The destination memory is automatically requested (see page
103).
Select the desired position in the destination memory using
the right rotary control
Navigation operation
.
for more than 2 seconds to
briefly pressed.
and press to confirm.
can
107