Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Removal/installation instructions
For removal, the unit must first be unlocked. For this purpose, push in both slides to the second detent position, as shown in Figure
. Subsequently, withdraw the unit with both slides. (Figure
). Then remove the slides by pressing the springs on the right
and left sides of the unit.
If the unit has been installed in another vehicle, the unit's springs may have to be adjusted before installation. To adjust the springs,
push in the slides as shown in Figure
and then adjust as shown in Figure
(press the slide lightly in direction 1 and simul-
taneously move the slide in direction 2).
137
Publicité
Chapitres
Table des Matières
