Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Removal/installation instructions
A universal bracket for DIN installation slots is integrated into this car radio. An installation frame is not required. The unit is
Removal / installation guide
inserted into the installation slot and secured with the slides supplied.
Complete the electrical connections. Then push the unit into the installation slot. Subsequently, push the slides into the apertures
in the front of the unit to the first detent position (Figure
Subsequently, remove the slides.
136
). Now lock the radio by pulling both slides, as shown in Figure
.
Publicité
Chapitres
Table des Matières
