SMA SUNNY BOY 3.0-US Instructions D'installation page 59

SMA Solar Technology America LLC
13. If the inverter is secured against theft with a padlock, open the padlock and remove it from the
inverter.
14. To secure the inverter to the wall mounting bracket, unsrew the screw M5x60 with a Torx
screwdriver (TX 25).
15. Remove the inverter by lifting it vertically up and off the wall mounting bracket.
16. Screw out the screws for fastening the wall mounting bracket and remove the wall mounting
bracket.
17. If the inverter is to be stored or shipped, pack the inverter and the wall mounting bracket. Use
the original packaging or packaging that is suitable for the weight and dimensions of the
inverter and secure the packaging with tension belts, if necessary.
18. Dispose of the inverter in accordance with the locally applicable disposal regulations for
electronic waste.
Installation Manual
9 Decommissioning the Inverter
SB30-77-1SP-US-40-IA-xx-13 59