Instructions For Use - MBM CPG77T Manuel D'installation Et D'utilisation

screw the connections
REPLACING IGNITION SPARK
Remove the high-voltage cable of
1.
the spark
Unscrew the nut
2.
Replace the spark new
3.
Connect the high voltage cable
4.
REPLACING PIEZO /
Disconnect the cable (s) from the
1.
ignition button
Replace the button
2.
Restore the connections
3.
SPARK IGNICTION REPLACEMENT
Remove box protection panel and
1.
connections
Unscrew the spark igniction screws
2.
Replace the spark igniction
3.
Replace connections, fixing and pro-
4.
tection.
REPLACING BURNER
Model 74 / 1. Unscrew the screws
LOCATION OF MAIN COMPONEN-
TS - see SECT. IMAGES - REF. o)
The layout of the figures is purely indi-
cative and can undergo variations.
1. Burner regulation knob
2. Piezoelectric button
3. Water knob for introducing water in
cooking compartment.
4. Gate valve for emptying water from
cooking compartment.
5. Pilot light control.
6. Pipe for introducing water in co-
oking compartment.
7. Cooking compartment.
KNOBS, KEYS AND INDICATOR
LIGHT MODES AND FUNCTIONS
see SECT. IMAGES - REF. p).
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
REPLACING COMPONENTS
2. Remove the burner / 3. Place the
new burner / 4. Screw - in
Model 77 / 1. Unscrew the upper and
lower screws and remove the side panel
2. Remove the burner / 3. Unscrew the
fastening screws / 4. Remove front panel
from burner to replace / 5. Insert the new
panel on the burner and screw / 6. Place
the new burner and replace the side panel
7. Tight the fixing screws of the panels
SOLENOID VALVE REPLACEMENT
Remove box protection panel
1.
Remove the connections
2.
Unscrew the fixing screws
3.
Replace the solenoid valve
4.
Replace all connections and box
5.
protection panel
Check the gas voltage with
the special tools and replace
the parts removed in the cor-
rect order.

INSTRUCTIONS FOR USE

The layout of the keys in the figures is
purely indicative and can be subject to
variations.
BURNER REGULATION KNOB
1
(GAS). It performs three different
functions:
1. Igniting the pilot light and burner.
2. Adjusting the flame (min - max).
3. Turning the appliance off.
PIEZOELECTRIC BUTTON /
2
It performs one function:
1. When pressed, it produces the
spark to ignite pilot light.
WATER FILLING KNOB: Fun-
3
ctions: 1. Reduced water flow ope-
ning. 2. Normal water flow opening. 3.
Water flow closure.
- 17 -
7.
EN
8.