Instructions for installation and use
2. Important information for your safety
The infrared cabin has been produced in accordance with the safety
regulations applicable for technical units. However, hazards may
occur during use. Therefore adhere to the following safety informa-
tion and the specific warning notices in the individual chapters.
2.1. Intended use
The infrared cabin serves for warming the human body.
The location of the cabin has to be protected against splash water.
For optimum operation, the site should have an ambient tempera-
ture of at least 20 °C. The maximum ambient humidity should not
exceed 95%.
The cabin has to be placed on a flat surface. A distance of at least
5 cm from the wall must be maintained.
Any use exceeding this scope is considered improper use. Improper
use can result in damage to the product, severe injuries or death.
2.2. Safety information
● Installation and connection of the electrical parts (control unit,
radiator, etc.) may only be performed when the power supply is
disconnected.
● Also comply with the regulations applicable at the installation
location.
● For your own safety, consult your supplier in the event of prob-
lems that are not explained in sufficient detail in the installation
instructions.
p. 4/44