Product Functions - Sentiotec VitaMy 164 Serie Instructions De Montage Et Mode D'emploi

Instructions for installation and use

3.4. Product functions

Infrared cabin
Solid cabin made of spruce for the infrared radiation of 2 people.
Resin pockets are not grounds for complaint. This is because resin pockets
often occur in spruce and the depth at which they are located cannot be
determined during sorting.
If they are just below the surface, they break open during heat genera-
tion and "bleed".
The leaking resin can be removed with an acetone rag. If only resin drops
appear, let them cure and then scrape them off carefully with a knife.
Infrared control wave.com4 Infra
Control for the dimming of 2 heating circuits each with a maximum of 1.5 kW as
well as the dimming of light and an optional fan.
The control unit only supports the operating mode "Intensity mode".
wave.com4 Bluetooth (only version VitaMy 164 BT)
The Bluetooth module wave.com4 sound allows you to play music in the sauna
or infrared cabin. The music is transmitted via a Bluetooth connection from
a Bluetooth-enabled device (= audio source) to the Bluetooth module. All
Bluetooth-enabled devices, such as most mobile phones, tablets, notebooks,
etc., can be used as an audio source. The amplifier is already integrated in the
Bluetooth module.
sound & light colour light (only version VitaMy 164 S&L)
The sound & light colour light lets music be played via a USB stick and the cabins
be lit with different colours.
The colour of light can be selected manually or different colours can be displayed
in automatic mode.
p. 7/44
EN