Installation Of The Sound & Light (Only Vitamy 164 S&L) - Sentiotec VitaMy 164 Serie Instructions De Montage Et Mode D'emploi

Instructions for installation and use
4.6. Installation of the sound & light (only VitaMy 164 S&L)
For the installation, commissioning and operation, follow the instructions
which are included which the sound & light colour light.
Installing the control panel and the USB dock
Install the control panel and the USB dock in the designated place on the back
wall of the cabin.
Fig. 49: Installing the control panel
Connecting the colour light
Install the colour lamp in the ceiling cutout using the provided screws. When
doing so, please refer to the enclosed instructions "wave.com4 sound&light".
Fig. 50: Installing the colour light
p. 38/44
wave.com4
USB
wave.com4
Infra
wave.com4
S&L