Power Fist 8598195 Manuel D'utilisateur page 3

V4.0
DANGER! This notice indicates an immediate and specific hazard that will
result in severe personal injury or death if the proper precautions
are not taken.
WARNING! This notice indicates a specific hazard or unsafe practice that
could result in severe personal injury or death if the proper
precautions are not taken.
CAUTION! This notice indicates a potentially hazardous situation that may result
in minor or moderate injury if proper practices are not taken.
NOTICE! This notice indicates that a specific hazard or unsafe practice will
result in equipment or property damage, but not personal injury.
WORK AREA
1. Operate in a safe work environment. Keep your work area clean, well-lit
and free of distractions. Place lights so you are not working in a shadow.
2. Remove all unnecessary people from the work area when welding.
Anyone remaining in the work area must wear the appropriate welding
safety equipment.
3. Store unused tools properly in a safe and dry location to prevent rust or
damage. Lock tools away and keep out of the reach of children.
4. Do not install or use in the presence of flammable gases, dust or liquids.
5. Welding sparks and ejected molten slag can start a fire. Remove
combustible materials within 39 ft (12 metres) of the welding unit. See Fire
and Explosion Precautions.
6. Have a fire extinguisher readily available (see Fire and Explosion
Precautions).
7. Use protective screens or barriers to protect others from flash and glare;
warn others in the area to look away from the arc.
8. Keep the welding unit at least one foot from any wall or structure.
9. Check that the work area is free from fires, sparks or hot debris
before leaving.
10. Do not expose the torch or oxygen cylinder to flammable materials. Control
the oxygen gas carefully. Oxygen can ignite easily and accelerates how
quickly other flammable material will burn.
Visit www.princessauto.com for more information
Cutting, Welding and Brazing Hose Torch 8598195
3