Power Fist 8598195 Manuel D'utilisateur page 12

8598195
12. Do not attempt to make regulator repairs. Send faulty regulators to the
manufacturer's designated repair center.
13. Do not weld on the fuel cylinder.
14. Keep your head and face away from the cylinder valve outlet when opening
the cylinder valve.
15. Compressed fuel cylinders must not be located in a confined space with the
person welding to prevent the possibility of leaks displacing the oxygen.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the contents are included.
Contents: • Torch Assembly with Hose and Valves
IDENTIFICATION KEY
A Burner Tip
B Fuel Tube
C Hand Grip
D Fuel Hoses
E MAPP Valve Connector
F Oxygen Valve Connector
ASSEMBLY & INSTALLATION
Letter references in parenthesis (A) refer to the included Identification Key.
Dashed numbers in parenthesis (Fig. 1-1) refer to a specific point in an
illustration or image.
1. Inspect each hose for frays or tears.
2. Make sure there are no obstructions in the burner tip opening.
12
Cutting, Welding and Brazing Hose Torch
Fig. 1
For technical questions call 1-800-665-8685
V4.0