CombiSteel GF Serie Manuel D'installation, D'utilisation Et D'entretien page 7

Data Plate:
Installation Clearances: The
Levelling:
Gas fryer Manual
WWW.HOREPA.NL
The data plate is located at the rear of the fryer
MINIMUM
surfaces is;
Sides 150 mm, and
Rear 50mm
Adequate clearance must also be provided for
service.
To adjust the legs to level the unit to the floor
and/or to slightly adjust the height of the unit, raise
the front of the unit and adjust the legs (ensure
safe work practices). Similarly, raise the back of
the unit and adjust the legs. DO NOT LAY THE
UNIT ON ITS BACK. ENSURE THE UNIT IS
LEVEL.
Tel: +31 (0)653140903
Page 7
clearance from combustible