Bartscher 285.620 Mode D'emploi page 43

thermocouple
To substitute the thermocouple, it is necessary to remove the handles of the container of the lava
stone , unscrewing with a setscrew wrench the socket head screws that fix it (for the models where
it is foreseen) remove the knobs and take off the control panel. It is then necessary to unscrew the
fitting of the thermocouple on the cock and the one on the pilot unit, then substitute the part.
WHEN SUBSTITUTING, ONLY ORIGINAL SPARE PARTS SUPPLIED BY THE
MANUFACTURER MUST BE USED. THE OPERATION MUST BE CARRIED OUT BY
AUTHORIZED PERSONNEL.
ATTENTION! In the event that components of the gas installation have been substituted, it is
necessary to check for tightness and the correct functioning of the various parts.
THE MANUFACTURER RESERVES THE RIGHT TO WITHOUT NOTICE MODIFY
THE FEATURES OF THE APPLIANCES DESCRIBED IN THIS MANUAL.
Pag. 42/65