Table 5) BURNER FEATURES (SE, DK, FI - CAT. II
Gas Type
Liquid Gas PLG
(G30-G31)
Natural Methane Gas
(G20)
Liquid Gas PLG
(G30-G31)
Natural Methane Gas
(G20)
Table 6) BURNER FEATURES (HU - CAT. II
Gas Type
Liquid Gas PLG
(G30-G31)
Natural Methane Gas
(G20)
Natural Methane Gas
(G25.1)
Liquid Gas PLG
(G30-G31)
Natural Methane Gas
(G20)
Natural Methane Gas
(G25.1)
WARNINGS
General
• Read the instructions carefully before installation, use and maintenance of the appliance.
• Installation must be carried out by qualified personnel following the manufacturer's instructions
in the specific manual.
• The appliance must only be used by trained personnel and only for the intended use.
• In the event of breakdown or malfunctioning, switch off the appliance and call in after sales
assistance only from an authorized centre.
• Use only original spare parts; otherwise no liability is accepted by the manufacturer.
• The appliance must not be washed with high pressure water sprays, neither must the openings or
air fumes on heat inlets/outlets be blocked.
III
1ab2H3B/P
Normal
Reduced
Diam. Main
Capacity
Capacity
[kW]
[kW]
[1/100 mm]
BURNER C Ø 85
9,00
3,50
9,00
3,50
BURNER D Ø 110
18,00
8,50
18,00
8,50
Normal
Reduced
Diam. Main
Capacity
Capacity
[kW]
[kW]
[1/100 mm]
BURNER C Ø 85
9,00
3,50
9,00
3,50
9,00
3,50
BURNER D Ø 110
18,00
8,50
18,00
8,50
18,00
8,50
Pag. 34/65
, III
)
1a2H3B/P
By-pass
Injector
Diameter
[1/100 mm]
AL150
100
AL220
Reg.
AL215
150
AL325
Reg.
By-pass
Injector
Diameter
[1/100 mm]
AL150
100
AL205
Reg.
AL235
Reg.
AL215
150
AL305
Reg.
AL355
Reg.
2H3B/P
Air
Pilot Injectors
Regulation
[N°]
"x" [mm]
14
Open
27
14
14
Open
27
15
,)
2HS3B/P
Air
Pilot Injectors
Regulation
[N°]
"x" [mm]
14
Open
27
14
27
14
14
Open
27
15
27
15
,