Command Information / Control Panel - APRILIA eSR2 Mode D'emploi

eSR2 / eSR2 EVO
Activation of direction indicators (if any)
Throttle (A): press down to accelerate.
Power button (B): Press to switch the item on/off.
Brake lever (C): pull the lever to brake
Speed level change: press the button (B) once to
select the desired level.
Quickly press 3 times in a row to switch from Km/h
to Mph.
Quickly press 4 times in a row to switch from ODO
to TRIP.
Lights: press the button (B) twice to switch them
on/off.
Bell: press button (D) once to activate it.
Modello Immagine di riferimento
eSR2
eSR2 EVO
5.

Command information / Control panel

eSRZ
Activation of direction indicators (if any)
Throttle (A): press down to accelerate.
ON button (B): press for 2 seconds to turn on or off the item.
Brake lever (C): pull the lever to brake
Speed level change: press the button (B) twice to select the
desired level.
Lights: press the button (B) once to switch them on/off.
ODO/Trip: press button (B) 3 times to switch mode
Km/h-Mph: press button (B) 4 times to switch mode
Bell: press lever (D) once to activate it
Simboli
1. Battery Level: The battery level is indicated by
4 bars.
2. Speedometer: Displays the current speed of the
scooter.
3. ODO: Total distance travelled.
4. TRIP: Single trip distance.
5. Lights indicator light.
6. Level 1 - The display will show 1 (up to 6 km/h).
7. Level 2 - The display will show 2 (up to 20 km/h).
8. Level 3 - The display will show 3 (up to 25 km/h).
9. Cruise Control: Speed control. It is activated after
the same speed has been maintained for a few
seconds. The display emits a short beep.
10. Service light: indicates that maintenance is
required by the assistance service
11. Bluetooth light: always on
12