General Safety Instructions - MS Schippers 1406500 Mode D'emploi

1.

General safety instructions

This manual is intended to support the use and maintenance of the various systems on the MS
Multi treatment unit. Please read and understand the entire manual before using any of these
systems.
The safe operation of equipment on the treatment unit is the responsibility of the user. All safety
instructions must be complied with before using the various devices on the treatment unit.
NEVER allow untrained personnel to operate devices.
The Multi treatment unit and its accompanying devices have been developed for use on animals;
NEVER use for other purposes.
Take appropriate precautions (e.g. protective clothing, safety goggles, dust mask, ear defenders,
gloves).
Pulse 50 and Pulse 250:
NEVER inject liquid into the air.
another person.
ALWAYS set the On/Off air supply valve on the dosing unit to OFF when the MS Pulse injection
system is not in use. The high-pressure hose and injection gun should also be depressurised.
NEVER store at temperatures
TAKE CARE The stream of liquid from the P50 and P250 injection gun is powerful enough to
penetrate gloves, boots and clothing.
NB: The Schipmatic Pulse 250 has been developed to administer mass injections of iron
preparations, commonly used vaccines and serums.
may cause technical problems. Injection by MS Pulse 250 is not recommended in these cases.
32
ALWAYS point the injection gun in a safe direction.
below 0 °C.
NEVER leave devices unattended.
Certain antibiotics and high-viscosity liquids
NEVER aim at