Publicité
Les langues disponibles
Les langues disponibles
Changing the S.BUS2 channel on your transmitter:
- First connect the receiver lead to the S.BUS socket on the
transmitter.
- A flight battery (6V - 25V / 5 NiXX ... 6S LiPo) must now be
connected to the speed controller's "Flight battery" socket.
- Open the "SBUS SERVO" menu in the transmitter's System
menu.
- Move to page 3 of the menu and press "CALL UP".
The following display appears:
The "CH" function can now be used to set your preferred channel
(default setting: channel 3).
Once you have set the channel, move to the "WRITE" function in order
to transfer the data to the speed controller.
Changing the S.BUS2 channel using the PC-Link software:
- The first step is to connect the receiver lead to the PC using the
CIU2 adapter.
transmitter.
- A five-cell NiCd / NiMH battery must then be connected to
the speed controller's flight battery socket.
- Open the PC-Link software.
Operating Instructions
Roxxy BL-Smart Control 940-6
- Click on "READ".
In the following display the tick (ID unused) must be removed; after
this click on "OK".
Your preferred channel can now be set using the "BUS channel" func-
tion.
Once you have set the channel, click on "WRITE" to transfer the data
to the speed controller.
6
# 31 8573
Publicité
