Valor 555CFK Manuel D'installation Et D'utilisation page 6

Installation with Valor Model Madrona MF28
1. Secure the fan control box bracket to the base of the
stove from underneath.
Fan control box
Fan control
position
box bracket
Stove MFCS01 or MFCS02
Arched or Square Fronted
Madrona Traditional: access at the left of the stove.
Madrona Modern: access in front, left of receiver.
6
Fan control box
position
Fan control
box bracket
Modern Stove MFCS05
2. Install the thermoswitch to the underside of the
burner plate, behind the pilot area, with 2 screws
taken from the burner plate.
p
Fasten thermal switch to underside of
dessous de la plaque du brûleur à
burner module with 2 existing screws
l'aide de deux vis tirées de la plaque
3. Remove the mounting plate from the fan and
discard it.
4. Position the fan in such way that its exhaust is
directed upwards, towards the space between the
inner and the outer walls of the firebox.
5. Using 3 screws, secure the fan to the firebox
bracket. Using the lower set of fixing holes on the
fan will ensure more space to handle the receiver in
front of the stove.
Rear of the fi rebox
q
Unscrew 3 screws and
remove fan mounting
plate
Fan