Valor 555CFK Manuel D'installation Et D'utilisation page 5

Installation with Valor Model Retrofire RF24 (Direct Vent ONLY)
4. Fasten the fan control box to lower left hand
support leg.
Fan and Bracket installed
with 2 mounting screws
Fasten Fan Control Box
to lower LH Support Leg
using 1 screw
5. Fasten the thermal switch to underside of burner
module using 2 screws.
p
Fasten thermal switch to underside of
dessous de la plaque du brûleur à
burner module with 2 existing screws
l'aide de deux vis tirées de la plaque
6. Test the fan operation as indicated on page 2 of this
manual.
7. Finish the assembly of the fireplace as indicated
in the installation manuals provided with the
fireplace's engine, front and trim.
q
5