Electrolux EB4GL70CN Notice D'utilisation page 43

3. Activate the Steam Cleaning function
in the main menu. The display shows
the duration of the function.
4. An acoustic signal sounds when the
programme is completed. Press a
button to deactivate the signal.
5. Wipe out the appliance with a soft
cloth. Remove the remaining water
from the steam generator.
Removing the shelf support
Installing the shelf support
To install the shelf support follow the pro-
cedure in the opposite order.
6. Keep the appliance door open for ap-
proximately 1 hour. Wait until the ap-
pliance is dry.
11.2 Shelf support
You can remove the shelf support to
clean the side walls.
1. Carefully pull the support up and out
of the front catch.
2. Lightly move the support on the front
catch inwards.
3. Pull the support out of the rear catch.
11.3 Steam generation system
CAUTION!
Dry the steam generator after
each use. Soak up water with the
sponge.
Remove the limescale residue
with water and vinegar.
ENGLISH 15