Backlight; Atp Passcode; Warranty; Technical Specifications - PERFECTPRO WORK-STATION Manuel De L'utilisateur

BACKLIGHT

When the radio is in operation or in standby, pressing any button will illuminate the LCD
display for approx. 10 seconds.

ATP PASSCODE

This radio is equipped with an Anti-Theft-Protection system (ATP system). When the
ATP system is enabled, a passcode is required for turning on the radio.
1. Press the On/Off button to turn on the radio.
2. Press the Menu button.
3. The display shows "System".
4. Rotate the Tuning knob until the display shows "Passcode". Press the Tuning
knob. "Enable" or "Disable" will be displayed, to enable ATP, turn and press Tuning
knob to select "Enable".
5. "Change Passcode" will be displayed, enter a 4-digits numeric passcode by
pressing the preset buttons (1-10)
6. "Confirm Passcode" will be displayed. Enter a second time the same passcode to
re-confirm.
7. To disable passcode, select "Disable" as previously showed. And re-enter the
previous passcode to disable the lock.
When ATP is enabled, and if wrong passcode is entered for three times, a timer will be
activated. The next attempt will be possible only after the timer has elapsed. The timer
period will be increased with further wrong passcodes.
WARNING: If you choose to activate the passcode, please note your passcode
somewhere safe as a memory back-up in case you should forget it. This as there
is no way to reset the radio should the passcode be forgotten!

WARRANTY

This radio has a 2 year limited warranty.
WARNING ! Warranty becomes void once the radio cabinet has been opened or
any modifications to the radio have been made !
The terms of the warranty of this radio do not cover the following:
- Damage caused by misuse, abuse, neglect, alterations or unauthorised repair.
- Normal wear and tear.
- Breaking or bending of the metal telescopic antenna.
- Batteries.
15

TECHNICAL SPECIFICATIONS

Technical data
This device is noise-suppressed according to the applicable EU
directives.
This product fulfills the European directives 2006/95/EC, 2005/32/
EC and 2004/108/EC.
This device conforms to the safety regulation DIN EN 60065 (VDE
0860) and therefore the international safety regulation IEC 60065.
Never open the device casing. The manufacturer will not accept
any liability for damage resulting from improper handling.
The type plate is located on the bottom of the device.
Environmental note
This product has been made from high-quality parts and materials,
which can be reused and recycled.
Therefore, do not throw the product away with normal household
waste at the end of its life. Take it to a collection point for recycling
electrical and electronic device. This is indicated by this symbol on
the product, in the operating manual and on the packaging.
Please find out about collection points operated by your local
authority. Help protect the environmental by recycling used
products.
Power supply
Mains operation:
AC 230 V ~, 50/60Hz
Battery operation:
6 x 1,5V (Type IEC LR20 / UM-1 / D-size) or
Battery for Back up:
2 x 1,5V (Type LR6 / UM-3 / AA-size)
Power consumption (mains supply)
Operation: < 33 W
Standby: < 1 W
Frequency coverage
FM 87.5 – 108,0 MHz
DAB 174,928 – 239,200 MHz
Speaker
Size 2 x Ø 1 00mm
Impedance 8 ohms
Output Power
Nominal 2 x 10W
Aux in socket
Ø 3 ,5mm
GB
G B
16