Backlight; Tone; Warranty - PERFECTPRO ROCKBOX Manuel De L'utilisateur

BACKLIGHT

LCD backlight configuration
1. Press the On/Off button to turn on the radio.
2. Press the Menu button, and then rotate the Tuning knob until the display shows
"System".
3. Press the Tuning knob; rotate the Tuning knob until the display shows "LCD
backlight".
4. Press the Tuning knob to enter the LCD backlight adjustment menu.
5. Rotate the Tuning knob to select "on" in order to keep backlight always lightened
when the radio is turned on with AC power supply;
6. Or rotate the Tuning knob to select "off" (by default) so that the backlight will be
lightened for about 10 seconds whenever a button is pressed with AC power supply.
7. Press the Tuning knob to confirm your choice.
Note: The LCD backlight option "on" is only functional when the radio is powered
by AC power supply. When the radio is powered by battery power supply, the
LCD backlight is switched to option "off" – 10 seconds lightened when a button is
pressed. When the radio is connected to mains AC power again, the last user
setting will be applied again.

TONE

The Tone function enables the user to adjust the lower and higher sound frequencies.
1. Press the On/Off button to turn on the radio.
2. Press and hold the Volume knob for about 3 seconds, the display shows "BASS 0".
3. Rotate the Volume knob to set the desire Bass level.
4. Press the Volume knob to confirm, the display shows "TREBLE 0".
5. Rotate the Volume knob to set the desire Treble level.
6. Press the Volume knob to confirm and return to normal display.

WARRANTY

This radio has a 2 year limited warranty.
WARNING ! Warranty becomes void once the radio cabinet has been opened or
any modifications or alterations to the radio have been made !
The terms of the warranty of this radio do not cover the following:
- Damage caused by misuse, abuse, neglect, alterations, accidents or unauthorised
repair.
- Normal wear and tear.
- Breaking or bending of the metal telescopic antenna.
19