Factory Reset - PERFECTPRO ROCKPRO Mode D'emploi

Note: If you make a mistake at any point while setting the alarms, use the Back button
to go back to the previous screen.

FACTORY RESET

If you wish to completely reset Perfectpro Rockpro to its initial state this may be
performed by following this procedure. By performing a factory reset, all user entered
settings will be erased.
Access the menu for the current mode by pressing the Menu button. Rotate the
Tuning/Seek/Select control to highlight the 'Main menu' option, then press the control
to select.
Rotate the Tuning/Seek/Select control until 'System settings' is highlighted and then
press the control to select.
35