Mounting - SICK IN4000 Direct Serie Notice D'instructions

Masquer les pouces Voir aussi pour IN4000 Direct Serie:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Operating instructions
IN4000 Direct
4

Mounting

WARNING
WARNING
DANGER
8012183/ZWH0/2018-06-05
Subject to change without notice
Mounting
The IN4000 Direct safety switch is only allowed to be
fitted by authorized specialist personnel.
Select the mounting location and the mounting position
for the safety switch such that
• it is difficult for operators to access the safety switch
when the protective device is open,
• it is possible to inspect and replace the safety
switch.
Bypassing the inductive safety switch by simple
means or unintentional actuation must be prevented
by appropriate installation features as per
EN ISO 14 119.
Damage to the safety switch due to mechanical
loads
Loss of the safety function
⋅ Protect safety switch against mechanical loads such
as impacts or continuous contact pressure, e.g. by
using an additional stop.
© SICK AG • Germany • All rights reserved
en
Chapter 4
67

Publicité

Table des Matières
loading

Table des Matières