Publicité
electrical connection / surface Mount
en
RED
To +VDC (fuse @ 3A)
BLACK
To Chassis Ground
YELLOW
For Synchronization:
Connect YELLOW wires of all heads together
for synchronization (all heads must be set at
the same pattem)
18
For Simultaneous or Alternating Flash:
1. Apply +VDC to RED and YELLOW wires si-
multaneously to enter Grouping mode; light-
head will display short (single or double)
flashes:
• Single flash = Group 1
• Double flash = Group 2
2. Remove YELLOW wire from +VDC and mo-
mentarily apply to +VDC to change Groups:
• Heads in the same Group flashtogether.
• Group1 Heads alternate with Group2 Heads.
For Flash Patterns:
Momentarily apply +VDC to
YELLOW wire:
• once for next pattern
• quickly three times for pattern 0
FP-Nr.
Blinkmuster:
1
Single *
2
Double *
3
Triple *
4
Quad
5
Steady
* only the flash patterns 1 ,2 and 3
are approved for use in europe.
Publicité
