Bosch MUC1 Serie Mode D'emploi page 33

Problem
The appliance boils over.
LED does not light up.
The hotplate does not function. Fault in the appliance.
Water is flowing out of the
appliance.
Display screen
E1~E5
If you are unable to solve the problem, always call the hotline!
You will find the telephone numbers at the back of these instructions.
Cause
Filled beyond capacity.
The temperature is too high.
The selected preparation pro-
gramme requires the meal to be
cooked with the lid open.
The appliance is switched off.
Fault in the power cord.
The hotplate is damaged.
The appliance features overflow
protection.
Fault in the appliance.
Troubleshooting
Remedial action
Adjust the amount.
Reduce the temperature.
Open the lid of the appliance.
Switch on the appliance.
Contact customer service.
Contact customer service.
Remove the water. Remove the pan and
use a cloth to rub the appliance interior
dry. Ensure that no water enters the
appliance interior.
Abort the preparation programme.
Disconnect the appliance from the power
supply. Switch the appliance on again.
Please contact customer service if the
problem persists.
en
33