Instruction To Use; On / Off; Mode Selection - Oceanic OCEACLIM900W9 Guide D'utilisation

IMPORTANT :
- When stopping the air conditioner, wait at least 3 minutes before turning it on
again.
- In order to optimize the performance of your air conditioner, we recommend that
you do not expose it directly to sunlight during operation (if possible, pull the
curtains or close the shutters).

1. ON / OFF:

The buttons on the control panel or on the remote control can be used to turn the unit
on or put it to sleep. (Point 1)
In standby mode, the display shows the ambient temperature.
When the unit is in operation, the display shows the target temperature.

2. MODE SELECTION:

The buttons on the control panel or on the remote control allow you to select one of
the 3 modes (Point 2):
• Cooling
• Dehumidification
• Ventilation
Select the desired mode Cooling, Dehumidification or Ventilation, by successively pressing
the MODE button on the unit or the corresponding button on the remote control. The
indicator corresponding to the selected mode lights up.
V. INSTRUCTION TO USE
45