How To Use The Buttons; Auto Operation; Cooling/Fan Operation - Oceanic OCEACLIM120W0 Manuel De L'utilisateur

SET TEMPERATURE( F)
AUTO
COOL
DRY
TEMP
2
MODE
ON/OFF FAN SPEED
1
SWING SLEEP
ION
RESET LOCK
TEMP
LED
SENSING
DISPLAY
SET TEMPERATURE( F)
AUTO
COOL
DRY
TEMP
2
MO DE ON/OFF
1
SWING
SLEEP
ION
RESET LOCK
TEMP LED
SENSING DISPLAY
114

How to use the buttons

FAN
HIGH
Ensure the un it is plug ged in and p owe r is
MED
LOW
avail able. The OP ERATIO N indicator on the
displ ay panel of the unit illuminates.
1. Press the
3
2. Press the
temperature. T he temp erature can be set
TIMER ON
wi thin a range of 17 C(62 F)~ 30 C(88 F)
in 1 C(2 F) increments.
TIMER OFF
3. Press the
conditi oner.
NOTE:
1. In the Auto mode, the air conditioner can logically
choose the mode of Cooling, Fan and Dehumidifying
by sensing the difference between the actual
ambient room temperature and the set temperature
on the remote controller.
2. In the Auto mode, you can not switch the fan speed.
It has already been automatically controlled.
3. If the Auto mode is not comfortable for you , the
desired mode can be selected manually.

Cooling/Fan operation

FAN
Ensure the un it is plug ged in and p owe r is
HIGH
MED
available.
LOW
1. Press the
FAN mode.
2. Press the
4
tem perature. The temperature can be set
FAN SPEED
3
within a range o f
TIMER ON
in 1 C(2 F) incre ments.
3. Press the
TIMER OFF
fan speed in four steps- Auto, Lo w, M ed,or Hi gh.
4. Press the
conditioner.
NOTE
In the FAN mode, the setting temperature is not
displayed in the remote controller and you are not
able to control the room temperature either. In this
case, only step 1, 3 and 4 may be performed.

Auto operation

M ODE button to select Auto.
TEMP bu tton to set the desired
O N/O FF
button to start the air
M ODE
button to select CO OL or
TEMP bu tton to set th e desired
17 C(62 F)~ 30 C(88 F)
FAN SPEED button to select the
O N/O FF
button to start the air