Installation And Wiring; Safety Instructions - Burkert 8220 Manuel D'utilisation

Sensor K=0,1
• Measurement range
• Type of fluid
Sensor K=1
• Measurement range
• Type of fluid
Sensor K=10
• Measurement range
• Type of fluid
12
• 0,5 to 200 μS/cm
• pure water, industrial water
• 0,005 to 10 mS/cm
• industrial water, waste water
• 0,5 to 200 mS/cm
• waste water, concentrated
solution
English
Type 8220
Installationandwiring
7

insTAllATion AnD Wiring

7.1

safety instructions

danger
Danger due to electrical voltage
▶ Shut down the electrical power source of all the conductors and
isolate it before carrying out work on the system.
▶ Observe all applicable accident protection and safety regula-
tions for electrical equipment.
risk of injury due to high pressure in the installation.
▶ Stop the circulation of fluid, cut off the pressure and drain the
pipe before loosening the process connections.
risk of injury due to high fluid temperatures.
▶ Use safety gloves to handle the device.
▶ Stop the circulation of fluid and drain the pipe before loosening
the process connections.
risk of injury due to the nature of the fluid.
▶ Respect the prevailing regulations on accident prevention and
safety relating to the use of hazardous products.