Husqvarna T525 Manuel D'utilisation page 29

Checking the chain brake
• Place the chainsaw on firm ground and start it. Make
sure the chain does not touch the ground or any other
object. See instructions under the heading Starting
and stopping.
• Grasp the chainsaw firmly, wrapping your fingers and
thumbs around the handles.
Apply full throttle and activate the chain brake by tilting
your left wrist forward onto the front hand guard. Do not
let go of the front handle. The saw chain should stop
immediately.
Throttle trigger/throttle trigger lockout
• Make sure that the throttle trigger is locked at idle
setting when the throttle trigger lockout is released.
MAINTENANCE
• Press the throttle trigger lockout down and make sure
that it returns to its default position when you release
it.
• Check that the throttle trigger lockout and the throttle
trigger move freely and that both return to their default
positions.
• Start the chainsaw and apply full throttle. Release the
throttle trigger and check that the saw chain comes to
a stop within 3-4 sec. If not, contact your servicing
dealer.
Chain catcher
• Check that the chain catcher is not damaged and is
firmly attached to the body of the chainsaw.
Vibration damping system
• Regularly check the vibration damping units for cracks
or deformation.
–
English 29