9.2.10 Digital I/O
In the Digital I/O tab it is possible to configure the
digital channels available in the device. What follows
is a brief description of the configurable parameters
for each digital input.
• Alarm ID: Field used to select the desired digital
input.
• Type: It indicates the default state of the digital
input. It can be set Normally Open or Normally
Closed.
Fig. 49
9.2.11 Wiper
Do not use the wiper when the outside
temperature is below 0°C or in case of ice.
The integrated wiper does not interfere with the
viewing range of the installed camera.
9.2.12 Washer
From the Washer menu, it is possible to configure the
device wash system functions.
Fig. 50
32
9.2.13 Encoder Parameters
The first 2 video streams can be configured under
the Encoder Parameters menu. The first stream
is compulsorily compressed with the H.264/AVC
algorithm while the second can, alternatively, use the
MJPEG code. For both streams it is possible to set the
video dimension, the frame rate, the use of the rate
controller and the GOP size. The On Screen Display
(OSD) can also be configured in order to name the
video before compressing it.
Any additional video flows can only be
configured using the ONVIF protocol.
Fig. 51
MNVCMPXHD_1607_EN