Troubleshooting - Martin Logan Motion Vision Guide De L'utilisateur

t
roubleshootIng
Soundbar does not turn on
• Check that the soundbar's AC power cord is
firmly attached to the AC Power In input and
plugged into a working AC outlet.
No output from the soundbar
• Check that the soundbar is turned on.
• Check that the soundbar is not muted.
• Check that the soundbar's volume is not
turned all the way down.
• Check that the soundbar is set to the proper
input.
• Check that all system components are turned
on and source material is playing.
• Turn the soundbar off and on using the
remote control or the top panel power button.
• Unplug the sound bar, wait 30 seconds, and
plug it back in.
• Check that all interconnecting cables are con-
nected at both ends.
• If necessary, try connecting an alternate
source component to make sure the original
source component isn't the problem.
The sound bar displays 'DSP NG'
• Turn the soundbar off and on using the
remote control or the top panel power button.
• Unplug the sound bar, wait 30 seconds, and
plug it back in.
No surround sound
• Review the "Connection" section of this
manual for a better understanding of recom-
mended connection methods and possible
options than might impact the soundbar's
ability to receive multi-channel encoded
audio from your television and other audio/
video source components.
Sound is coming from both my sound-
bar and my television
• When utilizing the soundbar to reproduce
audio, the television's audio output should be
defeated. Some televisions will allow you to
turn off the internal speaker via the television's
menu system. Other televisions may require
you to turn the television's volume to "zero" or
to "mute" the television.
The soundbar is too quiet even when
the soundbar is turned up
• Check that the output on your television or
other source components are not connected
via a variable level output. Sometimes this
option may be configured in your source
components menu. Please refer the manual
for the source component in question.
Soundbar won't learn remote codes
from aftermarket remote
• Review the "Menu Option: Learn" section of
this manual.
• Hold the remote 12 inches (30 cm) from the
soundbar during the learning process.
• Press the appropriate button on the second
remote four times.
• There may be remotes that the soundbar
cannot learn or that the soundbar can not
learn correctly. Due to the number of avail-
able remotes it is impossible to advise which
remotes will or will not work.
• Check the user manual and/or manufac-
turer's web-site for your aftermarket remote to
see if MartinLogan is supported. If so, instead
of 'learning' with the soundbar, use the code
provided by the manufacturer to program the
aftermarket remote itself.
25