Source Name; Reset - Martin Logan Motion Vision Guide De L'utilisateur

• OPTIC.2 [OPTICAL 2 INPUT] (direct access)
• COAX [COAXIAL INPUT] (direct access)
• ANALOG [ANALOG INPUT] (direct access)
Choose the command you want to program and
press the right directional button. The soundbar will
respond with 'PUSH.BTN'. Hold the second remote
approximately 12 inches (30cm) from the soundbar
and press the appropriate button four times.
If the new command is learned successfully, the
soundbar's display will display "SET". If the new
command is not learned, the soundbar will display
"FAILED". Repeat the process if learning fails.
LEARN > ERASE: Enter the 'ERASE' submenu
by pressing the right directional button. Erasing
will clear programming for the second remote. The
'ERASE' function requires confirmation.
LEARN > ERASE > CONFIRM: Enter the 'CONFIRM'
submenu by pressing the right directional button.
LEARN > ERASE > CONFIRM > NO:
Activate by pressing the right directional button.
Choosing this option will exit without erasing the
remote programming.
LEARN > ERASE > CONFIRM > YES:
Activate by pressing the right directional button.
The soundbar will respond with 'ERASED'. After
the remote codes are erased, there is no way to
recover the previous user-configured settings.
MENU OPTION: SOURCE NAME
SRC.NAM: [SOURCE NAME] Enter the 'SRC.
NAM' submenu by pressing the right directional
button. The settings in this menu will allow you
to assign new names to display on the soundbar
when changing inputs. For example, you can pro-
gram the 'OPTIC 1' input to display 'DVD'.
22
Using the up/down directional buttons, you can
select and program the following input names:
• OPTIC.1 [DIGITAL OPTICAL 1]
• OPTIC.2 [DIGITAL OPTICAL 2]
• COAX [DIGITAL COAXIAL]
• ANALOG [LEFT/RIGHT ANALOG]
Choose the input name you want to reprogram
and press the right directional button. The soundbar
display will appear to be blank or will display the
current name. Pressing the up/down directional but-
tons will cycle through the available alpha-numeric
characters. Pressing the left/right directional but-
tons will move to the next space. You can use up to
seven characters when inputting a new name.
To finish programming an input name, use the left/right
directional buttons to move all the way to the left or right.
MENU OPTION: RESET
RESET: Enter the 'RESET' submenu by pressing the
right directional button. Resetting the soundbar will
erase all user-configured presets and restore all set-
tings to the factory defaults. The 'RESET' function
requires confirmation to reduce the risk of perform-
ing and accidental reset.
RESET > CONFIRM: Enter the 'CONFIRM' sub-
menu by pressing the right directional button.
RESET > CONFIRM > NO: Activate by press-
ing the right directional button. Choosing this
option will exit without performing a reset.
RESET > CONFIRM > YES: Activate by press-
ing the right directional button. The soundbar will
respond with 'RESETNG' [RESETTING]. Once com-
plete, your soundbar will be reset to factory default
settings. After a reset has been performed, there is no
way to recover the previous user-configured settings.